Home » Downloads » Compare your calculated exposures in Unit IV to one of the occupational exposure limits (OELs) in the table.

Compare your calculated exposures in Unit IV to one of the occupational exposure limits (OELs) in the table.

Compare your calculated exposures in Unit IV to one of the occupational exposure limits (OELs) in the table.

This assignment has two parts. Both parts will be combined and submitted within the same document. For this assignment, begin by analyzing the items in the table below and then answering the associated questions.

Hazard  Occupational Exposure Limits (OEL)s
Manganese Fume  5 mg/m3 (OSHA Ceiling )
0.1 mg/m3 (ACGIH 8-hour TWA (I))
Copper Fume     0.1 mg/m3 (OSHA 8-hour TWA)
0.2 mg/m3 (ACGIH 8-hour TWA)
Lead Fume       0.05 mg/m3 (OSHA 8-hour TWA)
0.05 mg/m3 (ACGIH 8-hour TWA
1,2,4 trimethylbenzene  OSHA – None Established
25 ppm (ACGIH 8-hour TWA TLV)
Toluene 200 ppm (OSHA 8-hour TWA)
300 ppm (OSHA Ceiling)
20 ppm (ACGIH 8-hour TWA TLV)
Xylene  100 ppm (OSHA 8-hour TWA)
100 ppm (ACGIH 8-hour TWA
Metal Working Fluids    OSHA – None Established
0.5 mg/m3 (NIOSH 10-hour TWA REL)
Part I: For each of the chemical hazards answer the following:

Compare your calculated exposures in Unit IV to one of the occupational exposure limits (OELs) in the table.
Does the calculated exposure exceed the OEL you chose?
Discuss why you chose the OELs you used.
Provide your opinion as to whether the risk associated with each exposure is an acceptable level of risk.
Part II: Analyze the table below, and then answer the associated questions.

Location        Shift Length    Result
Shipping/Receiving      8 hours 78.3 dBA (Lavg)
Hydraulic Press 12 hours        93.0 dBA (Lavg)
Metal Working Line      12 hours        84 dBA (Lavg)
Robotic Welding 12 hours        80.5 dBA (Lavg)
Hand Welding    12 hours        81.3 dBA (Lavg)
Paint Booth     12 hours        79.5 dBA (Lavg)
QA/QC Laboratory        8 hours 70.0 dBA (Lavg)
Final Inspection        8 hours 73.5 dBA (Lavg)
Answer each of the following:

Which of the results exceed the OSHA PEL?
Which of the results exceed the OSHA action level?
Provide your opinion as to whether the risk associated with each exposure is an acceptable level of risk.
Your assignment must be a minimum of two pages in length, not including title or reference pages. Your assignment must use at least two references. One must be gathered from the CSU Online Library; the other may be your textbook. All references and in-text citations must be formatted according to APA standards.

Answer preview to compare your calculated exposures in Unit IV to one of the occupational exposure limits (OELs) in the table.

Compare your calculated exposures in Unit IV to one of the occupational exposure limits (OELs) in the table.

APA

978 words

Get instant access to the full solution from yourhomeworksolutions by clicking the purchase button below